Equipment

Dive Computers: Planning, Settings and Shared Decisions

Use a dive computer as a personal exposure model and information tool—not as permission to outsource the dive plan.

Existing guide · Editorial review pending · Updated 1 Sept 2026
YouDive mascot illustration for Dive Computers: Planning, Settings and Shared Decisions

Two computers can display different remaining time after the same dive because algorithms, settings, gas and recent history differ. That is expected; a buddy team still needs one coherent plan.

Learn the display and alarms before the first important dive, especially when renting or changing equipment.

THE VISUAL EXPLANATION

The screen is one source of information

Dive computer limits

Inputs

Identify the settings and measurements used by your device.

Model

Understand that the displayed information comes from a model.

Judgement

Training, the shared plan and conditions still need consideration.

Original YouDive visual discussion guide. Use the article and its sources for context; qualified review is pending.

Set the correct inputs

Confirm time, units, altitude mode, gas fraction, personal conservatism and transmitter pairing. Analyse Nitrox independently before entering the value.

  • oxygen fraction and maximum operating depth
  • audible and vibration alarms
  • sampling or display mode
  • battery state
  • backup plan

Plan as a team

Agree maximum depth, time, gas reserve and ascent before the dive. The most conservative relevant limit normally governs the team; no-decompression time does not replace gas planning.

Respond to differences conservatively

Do not average two displays or follow the more permissive one. End or modify the dive using the agreed plan and the more limiting information, then understand the difference on the surface.

Photograph the key setting screens before the trip. It is easier to spot an accidental change when you know what normal looked like.

Common questions

Can buddies share one dive computer?

Each diver should track their own exposure with an appropriate computer or plan. A computer follows the wearer, not the team.

Can I change algorithms between dives?

Avoid changing settings to obtain more time. Understand the manufacturer's instructions and seek appropriate training.

What if the computer enters decompression unexpectedly?

Follow the training and manufacturer guidance, communicate with the buddy and complete a controlled ascent within available gas rather than improvising extra exposure.

This guide supports learning and planning. Confirm current requirements with the relevant agency or operator; practical skills need qualified instruction.

Keep exploring

Dive Computers: Planning, Settings and Shared Decisions | YouDive Australia